How to Set Filter Refresh Rates
You can select how often you would like the filter condition(s) to refresh its current results. Refresh interval choices range from Real-Time to Hourly. By doing this, you will get a fresh set of results each time that interval is reached. TC2000 will automatically re-filter your selected WatchLists for the results current at that moment.
![](https://media.screensteps.com/image_assets/assets/007/258/151/original/18c03c8a-91a4-48e1-aa13-041a3a11cf0b.png)
1. In an open WatchList window with Filter active, click the Refresh drop down to access the timeframe menu
![](https://media.screensteps.com/image_assets/assets/007/243/665/original/aecbc307-6736-41c8-81f7-113d93df0f04.png)
2. Select time interval desired
This will set the interval at which the filter will be refreshed with updated results.
![](https://media.screensteps.com/image_assets/assets/007/243/668/original/2518d304-873f-4adb-b2ec-f5b139b82c87.png)
Manual: refresh the filter results manually by clicking the refresh icon. A time stamp (date and/or time) occurs and remains until the filter is manually refreshed again.
![](https://media.screensteps.com/image_assets/assets/007/258/153/original/2d87f9dc-a18f-40c6-93ff-68ae241c53e9.png)
Other choices:
Real-time: the filter is streaming and results are always current.
5 seconds - 1 hour: choose a timeframe and the filter will be refreshed automatically at that interval
![](https://media.screensteps.com/image_assets/assets/007/243/673/original/bc749294-960a-4c7f-a300-60150ccc1565.png)
Select date on chart: works with the pointer. Click and drag the point on the chart to run the scan and get the Filter Results for that date. (Platinum service level required).